ideation pictures

sorry that you cant see some of them very well but here are our ideation drawings.

ideation phase

Brogan and I ideation phase is going well and we have a large understanding of what we are going to create and we are thinking of a sustainable resort in Bora Bora which includes over water bungalows. To make our resort sustainable, we are going to include a skylight to allow for natural light, cross ventilation for airflow, bifold doors to allow natural light and cross ventilation, and water turbine to create energy. on my next post i will show you pictures and plans of our resort and hopefully by next lesson we will be in the workshop.

my partner

my partner is brogan

Time management plan

Wardy's Workshop

Today we went into the workshop where Mr Ward showed us a demonstration of how to make the base for our sustainable resort. When making our base we will need a piece of DMF wood cut to 400mm x 400mm, Long blocks of wood to glue under the base to add extra height, nails, hammer etc. the machines that will be used are the band saw and belt sander. hopefully next lesson we can make a start, maybe even finish our base for our sustainable resort.

New Year, new unit

This year in our unit we are focusing on architecture and sustainable design. For this assessment we are to do it in pairs and I am going with Brogan. My partner and I are to are to design and fabricate a scaled model of our chosen theme-specific resort to be made on a base area of 400mm x 400mm. we have already begun the ideation phase and have a few very good ideas that we might consider including in our final product.

Mechanism process

I have just completed my assignment questions as shown in my previous post. Now I am back in the workshop working on my 'Ocean motion' mechanism. It is finally starting to come together now as I have completed the box and some parts that go into it. Here is a picture of my mechanism so far

Questions for assessment 'Ocean Motion'

List the materials that were used in the construction of your mechanized toy.

·      Plywood

·      Hot glue gun

·      PVA glue

·      Circular Cams

·      Shaft

·      Crank

·      Dowel

·      Sand paper

Describe some environmental problems, which are caused by the overuse of wood products (i.e. deforestation).

The main environmental problem caused by the overuse of wood products is deforestation. Deforestation is the permanent destruction of indigenous forests and woodlands. The term does not include the removal of industrial forests such as plantations of gums or pines. Deforestation has resulted in the reduction of indigenous forests to four-fifths of their pre-agricultural area. Indigenous forests now cover 21% of the earth's land surface. Deforestation is brought about by, the conversion of forests and woodlands to agricultural land to feed growing numbers of people, the development of cash crops and cattle ranching, both of which earn money for tropical countries, commercial logging (which supplies the world market with woods such as meranti, teak, mahogany and ebony) destroys trees as well as opening up forests for agriculture, and falling of trees for firewood and building material; the heavy lopping of foliage for fodder; and heavy browsing of saplings by domestic animals like goats.

To compound the problem, the poor soils of the humid tropics do not support agriculture for long. Thus people are often forced to move on and clear more forests in order to maintain production.

Another environmental problem that is caused by the overuse of wood products is pollution. Pollution is the introduction of contaminants into the natural environment that causes adverse change. When a tree is chopped down to make paper, it goes through factories, which use up energy creating greenhouse gases, such as carbon dioxide. The waste from the factories then gets dumped into places such as the river creating pollution, which is very bad for the environment.

Explain the difference between ‘open-loop and closed-loop’ control systems. Give an example of each.

A closed-loop control system is a system in which the output has an effect on the input in such a way as to maintain the desired output value. An open-loop control system is a control system that does not have a feedback loop and is not self-correcting. An example of an open-looped control system would be a light switch. An example of a closed switch control system would be refrigerator temperature regulating system

Provide a brief description of 3 different types of mechanisms i.e. linkage, cams

Cam- A cam is a rotating or sliding piece in a mechanical usage used especially in transforming rotary motion into linear motion or vice-versa. It is often a part of a rotating wheel (e.g. an eccentric wheel) or shaft (e.g. a cylinder with an irregular shape) that strikes a lever at one or more points on its circular path.

       

Linkage-A mechanical linkage is an assembly of bodies connected to manage forces and movement. The movement of a body, or link, is studied using geometry so the link is considered to be rigid. The connections between links are modeled as providing ideal movement, pure rotation or sliding for example, and are called joints. A linkage modeled as a network of rigid links and ideal joints are called a kinematic chain.

       

Gear-A gear is a rotating machine part having cut teeth, or cogs, which mesh with another, toothed part in order to transmit torque. Two or more gears working in tandem are called a transmission and can produce a mechanical advantage through a gear ratio and thus may be considered a simple machine. Geared devices can change the speed, torque, and direction of a power source. The most common situation is for a gear to mesh with another gear, however a gear can also mesh a non-rotating toothed part, called a rack, thereby producing translation instead of rotation.

Provide an in depth description of the primary mechanism used in your toy

The primary mechanism used in my mechanical toy is the circular cams. In ‘ocean motion’ there are no cam followers but each individual wave piece acts as its own cam follower and is moving up and down in contact with the cam. ‘Ocean Motion’ works because when the crank is turned, it turns the shaft where the circular cams are attached. The circular cams rise at different times and heights creating the wave motion because the cams are slightly offset from the cam before it. This makes each wave piece lift up at different times.

Evaluate your finished product in terms of ergonomics, aesthetics and function.

Although my mechanism ‘ocean motion’ is not fully completed, I have a fair idea of how my finish mechanical toy will turn out. Ergonomics relates to the artefacts interaction with the human body such as things like comfort, safety, and convenience, ease-of-use and ease-of-sight. My quite proud of the mechanism that I have produced as it is very safe made with strong glue and extra plywood to make sure it doesn’t brake and injure someone who might be playing with it. The edges of ‘Ocean motion’ were also sanded down with sand paper to leave no sharp edges where a little child could potentially cut itself on it. ‘Ocean motion’ is very convenient not only for entertainment purposes but also for decoration purposes because its ease-of-sight is very good and it is a very interesting piece of work and looks attractive to the human eye. In terms of its ease-of-use, my mechanism is were fluent and is very easy to use although there are a few minor areas that need fixing.

Aesthetics relates to the mechanisms colour, shape, proportion, texture and any other visual aspect of the artefact. ‘Ocean Motion’ is very appealing to the human eye due its unusual shape and way of movement with the individual wave pieces moving up and down at different times which people would fine fascinating, and without building experience, one would be confused to how this motion is actually occurring. I find the proportion of my mechanism the perfect size for any space whether you’re using it as a decoration on a table or desk or whether it is just for entertaining purposes. It is a handy size that it is not too big and not too small. I don’t think I will have time to paint my mechanism due the shortage of lessons we had this term, but hopefully I can paint it when I take it home.

The function is the most important part to evaluating your product, because even though your product might look the part, it might not do its part. My mechanism ‘Ocean motion’ was designed to be able to turn a crank in a clockwise direction which will also rotate cams attached to a shaft that lift the individual wave pieces up and down at different times. My mechanism successfully does this although it is not perfect and is still a few areas that need improvement. However, ‘Ocean motion’ still performs very effectively creating a wave motion efficiently and fluently. If I were to do this assessment again I would have fewer boats on the waves and would turn the boat sideways so it looks like the boat is actually going up and down the wave. Ideally though, if we did get the option to do this again, I would probably choose a different me mechanism to make like the ‘Caterpillar’ and ‘Ocean motion’ is very time consuming and at times can be very difficult to make.

currently i have finished making all the little bits that create the 'wave' segment of my mechanism. these are shown in the picture. i have also gathered all the cams i need for my mechanism and next lesson i will begin making my box.

this week in design futures we have begun working in the workshop to create our chosen mechanism. i am working together with Tegan to make my mechanism as we are doing the same one and by working together, it will speed up the progress. So far Tegan and I have measured and cut all of the pieces involving the wave using the bandsaw which was very time consuming, but we are now up to sanding the edges of the wood so that they are a perfect length.

Mechanical toys

I have decided to create the 'ocean motion' mechanism. it involves a crank and cams. it also involves rotary motion on a horizontal axis and reciprocating motion. i am doing the same desgin as what is on mechanical toys and it suits the mechanism and looks cool when the crank is rotated.

today i went through the ideation phase. I practices making a few different designs on pro desktop by revolving them but some just didnt look that appealing. i kept trying and eventually i found a design that i really liked. and turns out Mr ward also really liked it as he gave me a chocolate for my design.


:)

this week using the CAD textbook we created 2 cart wheels using the program por desktop. these took quite awhile to make but the finished product looked GREAT! we also started lookin up pictures on the internet of different types of vases to start thinking about our assessment for the ideation phase.

:)

New unit!!!!!!

This term we are using the program on the school laptops called pro desktop. this is a very fun program because yo can create a lot of different things but sometimes can get a bit frustrating. in the past lessons we have been playing around and designing our own shapes and exploring the program, and we have learnt many new things such as Drawing shapes, selecting edges, selecting faces, selecting parts, extrude profile, revolve, project profile, duplicate, dimensions, toggle construction and many other cool features.  But our assessment this term which is now underway is to create a vase and a stand. this is to be done by using our knowledge and design skills to create something extraordinary and something that will stand out.

Evaluation

FUNCTION:

Does the artefact do what it was designed to do?

Yes the desk tidy was meant to hold a variety of items to declutter my desk space, which is exactly what it has done.

Does it perform effectively and efficiently? 

Yes it works well effectively, cleaning up my desk space in a small and efficient way saving a lot of space on my desk.

what improvements could be made?

it could have been made with more side shelves to allow for more books to be held and it could have been made smaller so it doesn't take up as much room on my desk.

AESTHETICS:

I am very happy with the aesthetics of my desk tidy. The colour of my desk tidy that i chose was white. this was because my desk at home is white and i wanted it to match nicely. however, i wish i have added a little more colour to it as it is a bit too plain and boring and colour would have made it more exciting.

The shape of my desk tidy was interesting and different but was simple. this i found was very effective, as something something plain is better. overall i find my desk tidy very appealing and i would even consider buying one that looked like this in the shops.

ERGONOMICS:

my desk tidy is very convenient being fairly small, compact and light weight fitting on my desk space perfectly allowing my things to be decluttered. it is very useful when it comes to homework or study time as it allows you to place your ipad, phone, books and any other gadgets on the shelf, to give your more room to work. there is no safety issues when it comes to faults as the pieces very strongly and carefully glued together using a very strong acrylic glue, so this means that desk tidy will not collapse. they will also be no injuries when it comes to cuts as the sharp edges were all sanded down to soft curves.

ECONOMICS:

This desk tidy was very cheap to build making it very cost effective although it took a lot of time to make. Prices are as listed: 

1 acrylic sheet 122cm x 244cm = 29768cm2

2444cm2 (how much used) x 29768 (size of 1 sheet) x 95.70 (cost of sheet plus GST) = cost of desk tidy

2444 x 29768 x 95.70 = $7.85

therefore my desk tidy cost approximetely $7.85

these are pictures of my finished desk tidy

assignment questions

1.         Choose 2 machines that you used in the fabrication of your desk tidy. With these machines in mind, outline WPH&S considerations that must be adhered to when using these machines. Include photographs of your chosen machines (OnGuard may be an excellent resource for this question).

Band saw-

Safety procedures

·         Wear safety glasses or a face shield.

·         Wear hearing protection that is suitable for the level and frequency of the noise you are exposed to in the woodworking area.

·         Wear protective footwear when required.

·         Ensure the blade is tracking correctly and runs freely in and against the upper and lower guide rollers.

·         Use band saw blades that are sharp, properly set and otherwise suitable for the job (e.g., the right tooth pitch; tooth form; blade width).

·         Hold stock firmly and flat on the table to prevent the stock from turning and drawing your fingers against the blade. Keep hands braced against the table.

·         Keep your hands on either side of the blade - not in line with the cutting line and the blade.

·         Keep the machine properly oiled and serviced.

·         Do not stop a band saw by thrusting stock against the cutting edge or the side of a blade immediately after the power has been shut off.

·         Do not remove sawdust or cuttings from the table by hand or with compressed air. Use a stick or brush.

·         Do not leave a saw running unattended. Turn off the power and make sure the machine has stopped running before leaving the area.

REFER TO PICTURE FOR DIAGRAM

Electric belt sander-

·         Always wear safety goggles and a dust mask

          When sanding, especially sanding over-head.

·         The machine is not suitable for wet sanding.

·         Do not use sanding paper larger than needed.

         Extra paper extending beyond the sanding pad can also cause serious lacerations.

·         The dust bag shall be equipped with the tool.

        It shall be emptied frequently. To connect dust bag, insert the adapter of dust bag to the dust-collection opening on the rear end of the sander.

WARNING

·         Do not throw sanding dust on an open fire

         because materials in fine particle form may be explosive.

WARNING

·         A suitable breathing respirator must be worn

       while sanding lead paint, some woods and metal to avoid breathing the harmful/toxic dust or air.

REFER TO PICTURE FOR A DIAGRAM

2.         The material you are using for your desk tidy is called Polymethylmethacrylate (ACRYLIC). It has specific properties and uses.  Choose 2 other common polymers and in table form give their industrial name, common name, properties and uses.

	Poly (styrene)	Nylon 66
Industrial name	Polystyrene	polyamide
Common name	Styrofoam	Nylon 6/6
Properties	»        Density – 1.05g/cc »        Dielectric constant – 2.4 to 2.7 »        Thermal conductivity – 0.08 W/(m.K) »        Young’s modulus – 3000-3600 Mpa »        Tensile strength – 46 to 60 Mpa »        Melting point - 240°C »        Water absorption – 0.03 to 0.1	»        Glass transition temp – 50°C »        Melting temp - 255°C »        Amorphous density at 25°C: 1.07g/cm3 »        Crystalline density at 25°C: 1.24g/cm3 »        Molecular weight of repeat unit – 226.32 g/mol
uses	·         Imac computer cases ·         Drinking cups ·         Model cars ·         Styrofoam	·         Fabric for clothing ·         Shock absorbers at high temperatures ·         Intricate peices

3.         Extrusion, injection molding, compression molding, vacuum forming and laminating are examples of common manufacturing processes used with polymers (Plastics). Choose one process and with the use of diagrams and bullet points outline the process.

COMPRESSION MOULDING

1.      Material placed in open, heated mould cavity

2.      Mould is closed with a top force or plug member, pressure is applied to force the material into contact with all mould areas.

3.     
Heat and pressure maintained until molding material has cured

REFER TO PICTURE FOR DIAGRAM

4.      Extension Work - Using processes acquired from your math’s lessons, calculate the amount of acrylic sheet that your FINAL desk tidy represents. Show all calculations; answer needs to be in square metres.

Working out:

10cm x 11.5cm x 2 = 230cm²

20cm x 16cm x 2 = 640cm²

24cm x 20cm = 480cm²

30cm x 24cm = 720cm²

20cm x 19cm = 380cm²

20cm x 7cm = 140cm²

26cm x 19cm = 494cm²

Total= 2444cm²

= 0.2444m²

My total amount of acrylic sheet that is used to make my desk tidy was 0.2444m²